MIKROTIK mAP lite (RBmAPL-2nD) mAP lite with 650Mhz CPU, 64MB RAM, 1xLAN, built-in Dual Chain 2.4Ghz 802.11bgn Dual Chain wireless

Ár:

11.400 Ft + ÁFA ( 14.478 Ft )

Menny.:

Kosárba rakom

Cikkszám:	MAP-LITE-RBMAPL-2ND
Gyártó cikkszám:	mAP lite (RBmAPL-2nD)
Elérhetőség:	Külső raktáron
Gyártó:	Mikrotik
Átlagos értékelés:	Nem értékelt

Leírás és Paraméterek

mAP lite The mAP lite is our smallest wireless access point. It is barely larger than a matchbox, we even had to use a special Ethernet port to match it’s slim profile. You can carry it anywhere: use as a travel router to extend that hotel internet to all your devices, or as a client device to improve your laptop signal range, the tiny mAP lite will be always with you. It can also serve as a simple configuration tool for your servers, if there is no ethernet on your mobile device. The mAP lite is a dual chain 802.11 b/g/n device and operates in 2GHz. Product specifications Details Product code RBmAPL-2nD CPU nominal frequency 650 MHz CPU core count 1 Size of RAM 64 MB 10/100 Ethernet ports 1 Wireless chip model QCA9533 Wireless standards 802.11b/g/n Power Jack 1 PoE in 802.3af/at (+4,5/-7,8 or +3,6/-1,2) Supported input voltage 5 V - 60 V Dimensions 48x49x11mm Operating System RouterOS Operating temperature range -30 + 70 C License level 4 Antenna gain DBI 1.5 CPU QCA9533 Max Power consumption 3.5W Number of chains 2 Storage type FLASH Storage size 16 MB Suggested price $25 Wireless specifications 2.4 GHz TX RX 1MBit/s 22 -96 11MBit/s 22 -89 6MBit/s 20 -93 54MBit/s 18 -74 MCS0 20 -93 MCS7 16 -71 wireless parameters may be limited in software, depending on your local regulatory limitations Included parts 5V 1A power adapter Performance test results RBmAPL-2nD QCA9533 100M one port test Mode Configuration 1518 byte 512 byte 64 byte kpps Mbps kpps Mbps kpps Mbps Bridging none (fast path) 8.1 98.4 23.5 96.3 173.6 88.9 Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 70.9 36.3 Routing none (fast path) 8.1 98.4 23.5 96.3 160.8 82.3 Routing 25 simple queues 8.1 98.4 23.5 96.3 90.8 46.5 Routing 25 ip filter rules 8.1 98.4 23.5 96.3 43.2 22.1 All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544) Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results